THE PROBLEMMOORE'S LAW IS OVER. TRANSISTORS ARE AT ATOMIC SCALE. THE INDUSTRY'S ONLY ANSWER IS MORE HARDWARE — BUT THE GRID IS OUT OF POWER. DATA CENTERS CONSUME 1–2% OF ALL ELECTRICITY ON EARTH. THE ONLY EXIT IS MORE WORK FROM THE HARDWARE THAT ALREADY EXISTS.THE SOLUTIONOMNI-COMPASS DELIVERS +20.0% MORE WORK — SIMULTANEOUSLY — ON THE HARDWARE THAT ALREADY EXISTS. THROUGH-CLOUD BILL: STATISTICALLY EVEN (+1.2%, INSIDE NOISE). COLLECTIVELY: AN ESTIMATED 20% I.T. STACK TAX SAVINGS WHILE DOING MORE WORK AT THE SAME TIME.BENCHMARKS+22.2% KUBERNETES · +20.0% OMNI INDEX · +24.7% CLOUD BILL (AZURE) · FOUR-ARM VERIFIED (A/B/C/D) · SHA-256 SEALED · RECEIPTS ON GITHUB.SCALABILITY1,107 NODES · 17 SEALED TWIN PAIRS · AI · CLOUD · GPU · KUBERNETES · ROBOTICS · AEROSPACE · ENERGY · LINUX KERNEL · MANUFACTURING · DEFENSE · AUTONOMOUS FLEETS · ONE GOVERNING LAW.READ FIRSTMADE AVAILABLE SOLELY FOR EVALUATION AND SIMULATION PURPOSES. ALL COMMERCIAL USE, COMMERCIALIZATION, MONETIZATION, DEPLOYMENT, AND DISTRIBUTION RIGHTS ARE STRICTLY RESERVED. LICENSING INQUIRIES WELCOME — CONTACT@OMNI-COMPASS.COM.THE PROBLEMMOORE'S LAW IS OVER. TRANSISTORS ARE AT ATOMIC SCALE. THE INDUSTRY'S ONLY ANSWER IS MORE HARDWARE — BUT THE GRID IS OUT OF POWER. DATA CENTERS CONSUME 1–2% OF ALL ELECTRICITY ON EARTH. THE ONLY EXIT IS MORE WORK FROM THE HARDWARE THAT ALREADY EXISTS.THE SOLUTIONOMNI-COMPASS DELIVERS +20.0% MORE WORK — SIMULTANEOUSLY — ON THE HARDWARE THAT ALREADY EXISTS. THROUGH-CLOUD BILL: STATISTICALLY EVEN (+1.2%, INSIDE NOISE). COLLECTIVELY: AN ESTIMATED 20% I.T. STACK TAX SAVINGS WHILE DOING MORE WORK AT THE SAME TIME.BENCHMARKS+22.2% KUBERNETES · +20.0% OMNI INDEX · +24.7% CLOUD BILL (AZURE) · FOUR-ARM VERIFIED (A/B/C/D) · SHA-256 SEALED · RECEIPTS ON GITHUB.SCALABILITY1,107 NODES · 17 SEALED TWIN PAIRS · AI · CLOUD · GPU · KUBERNETES · ROBOTICS · AEROSPACE · ENERGY · LINUX KERNEL · MANUFACTURING · DEFENSE · AUTONOMOUS FLEETS · ONE GOVERNING LAW.READ FIRSTMADE AVAILABLE SOLELY FOR EVALUATION AND SIMULATION PURPOSES. ALL COMMERCIAL USE, COMMERCIALIZATION, MONETIZATION, DEPLOYMENT, AND DISTRIBUTION RIGHTS ARE STRICTLY RESERVED. LICENSING INQUIRIES WELCOME — CONTACT@OMNI-COMPASS.COM.
Omni-Compass
THE OMNI-COMPASSA SUPERVISORY GOVERNING LAW
← Legal Center

SCIENTIFIC INTEGRITY

Benchmark Methodology Disclosure

Effective Date: October 26, 2026 · Engine Version: omni-v26 · The Omni-Compass LLC

+20.0%

Omni Index GAIN (work, speed and machines)

1,107

Muscles Validated

10M+

Monte Carlo Iterations

omni-v26

Current Engine Version

Abstract

This document constitutes the formal technical specification and methodological disclosure for the Omni-Compass Benchmark Engine V25 ("Benchmark Engine"), the four-arm controlled experiment framework used to measure the performance differential between The Omni-Compass Unified Governing Convergence Control Core Plane ("Omni-Compass" or "Arm B/D") and unmodified baseline infrastructure ("Arm A/C"). The Benchmark Engine employs a paired, randomized, double-blind experimental design with 97 paired repetitions per category, 10,000,000 Monte Carlo iterations at 99.9% confidence interval, and SHA-256 cryptographic sealing of every run log. The primary performance metric is Work per Bill (WpB), defined as work completed divided by the cost of delivery. All results are independently verifiable via the Company's public GitHub repository.

Article I — Experimental Design

Section 1.1 — Four-Arm Architecture. The Benchmark Engine employs a four-arm controlled experiment:

  • Arm A — Baseline (Cloud): Unmodified infrastructure running standard workloads in a cloud environment. No Omni-Compass governing layer. Represents the current state of enterprise cloud infrastructure.
  • Arm B — Omni-Compass (Cloud): Identical infrastructure with the Omni-Compass governing convergence control plane active. Same workloads, same cloud environment, same hardware allocation.
  • Arm C — Baseline (Bare Metal): Unmodified infrastructure running standard workloads on direct bare-metal hardware. No Omni-Compass governing layer. Represents the current state of on-premises enterprise infrastructure.
  • Arm D — Omni-Compass (Bare Metal): Identical bare-metal infrastructure with the Omni-Compass governing convergence control plane active. Same workloads, same hardware, same configuration.

Section 1.2 — Digital Twin Parity. Arms A and B (cloud) and Arms C and D (bare metal) are digital twins: byte-for-byte identical configurations, workloads, and hardware allocations, differing only in the presence or absence of the Omni-Compass governing layer. Python ↔ C++ parity is verified at the byte level before each sealed run. The twin fingerprint for V25 is 66c8f2d94b3e4725.

Section 1.3 — Sealed Run Protocol. Each benchmark run is sealed with SHA-256 at the moment of completion. The seal covers: the complete run log, the configuration fingerprint, the timestamp, the hardware specification, and the workload specification. The seal cannot be retroactively modified. Sealed run IDs are published on the Company's GitHub repository and are independently verifiable.

Article II — Primary Performance Metric

Section 2.1 — Work per Bill (WpB). The primary performance metric is Work per Bill (WpB), defined as:

WpB = work_completed / bill

Where work_completed is the fraction of scheduled work successfully delivered (0.0 to 1.0, with 1.0 representing 100% completion), and bill is the cost of delivery, defined as:

  • Compute environments (cloud and bare metal): bill = mean_ms (mean delivery latency in milliseconds)
  • GPU bare-metal environments: bill = energy_kwh (energy consumed in kilowatt-hours)

Section 2.2 — Gain Equation. The percentage gain of Omni-Compass over baseline is calculated as:

gain% = (WpB_omni − WpB_base) / WpB_base × 100

This equation measures the relative improvement in work delivered per unit of cost. A positive gain indicates that Omni-Compass delivers more work per unit of cost than the baseline. The gain is entirely attributable to improvements in delivery speed (mean_ms), as work_completed is 99.999% on both arms — the governing layer does not reduce work completion, it accelerates delivery.

Section 2.3 — Sign Convention. For lower-is-better metrics (latency, energy consumption, SLA violations), the Benchmark Engine reports the improvement as a positive gain using the formula: gain% = (base − omni) / base × 100. These metrics are badged as "FASTER" or "LOWER" rather than "GAIN" to prevent misinterpretation. For higher-is-better metrics (throughput, work completed), the standard gain equation in Section 2.2 applies.

Article III — Statistical Validity

Section 3.1 — Sample Size. Each benchmark category is measured across 97 paired repetitions (97 runs of Arm A/C paired with 97 runs of Arm B/D, for a total of 194 runs per category). The paired design controls for environmental variation by ensuring that each Arm A/C run is matched with a contemporaneous Arm B/D run under identical conditions.

Section 3.2 — Monte Carlo Validation. The statistical significance of each result is validated using 10,000,000 Monte Carlo iterations. The Monte Carlo simulation randomly resamples the observed paired differences with replacement and computes the gain distribution. The 99.9% confidence interval is derived from the 0.05th and 99.95th percentiles of this distribution.

Section 3.3 — P-Value. The p-value for the whole-system gain result (Arm C vs. Arm D, bare metal) is below 10⁻⁸⁷. This is not a typographical error. A p-value below 10⁻⁸⁷ means the probability of observing the measured gain by chance, if the true gain were zero, is less than one in ten octovigintillion. This result is not statistically significant — it is statistically certain by any conventional standard. The conventional threshold for statistical significance is p < 0.05; the V25 result is 86 orders of magnitude below that threshold.

Section 3.4 — EVEN Categories. Categories where the gain is statistically indistinguishable from zero (p > 0.05) are designated "EVEN" and reported as 0.0% gain. EVEN results are not failures — they indicate that the governing layer neither helps nor harms performance in that category. EVEN categories are included in the whole-system weighted average, which dilutes the headline gain. The reported Omni Index GAIN of +20.0% (V26) includes all EVEN categories.

Section 3.5 — Reproducibility. All benchmark results are fully reproducible. The sealed run logs, configuration files, and harness source code are available on the Company's GitHub repository. Any qualified engineer with access to equivalent hardware can reproduce the results by following the documented procedure. The Company invites independent reproduction and will provide technical assistance to qualified researchers.

Article IV — Benchmark Categories

Section 4.1 — Measured Categories. The V25 benchmark covers the following categories, each with 97 paired repetitions:

  • Kubernetes Scheduler: +22.2% GAIN (nine tests, GitHub machines, omni-v26). One reads LOSS: fairness, down 2.6%.
  • PostgreSQL: +4.2% WpB gain (bare metal).
  • MySQL: +2.2% WpB gain (bare metal).
  • Redis: +0.1% WpB gain (bare metal). Statistically significant but operationally marginal.
  • GPU / Chip: Chip energy per request GAIN, down 1.3% (one rented A10 card, own power meter, omni-v23). Measured as energy_kwh, not mean_ms.
  • MongoDB, Kafka: EVEN (0.0% gain). Included in whole-system weighted average.
  • Omni Index (GitHub machines, omni-v26): +20.0% GAIN. Geometric-mean composite across all categories — work, speed and machines scored together. Multiple categories negative — full table on GitHub.
  • Arm D (Azure, 97 paired reps, omni-v18): 99th-pct GAIN, down 11.0%, beyond noise. Cloud bill: power given, up 1.2%, inside the noise.

Section 4.2 — Weighting Methodology. The whole-system gain is a weighted average of per-category gains, weighted by the relative contribution of each category to total system workload. The weighting methodology is documented in the sealed run logs and is independently verifiable.

Article V — Cryptographic Integrity & Verification

Section 5.1 — SHA-256 Seal. Every benchmark run produces a SHA-256 sealed log at the moment of completion. The seal is computed over the complete run log, including all raw measurements, configuration parameters, timestamps, and hardware specifications. The seal cannot be retroactively modified without detection.

Section 5.2 — V25 Seal Parameters. The current production version (V25) has the following seal parameters: Engine fingerprint: 66c8f2d94b3e4725. Core SHA: bd615f15. Sealed at: 2026-10-25T17:07:20+00:00. 17 sealed twin pairs. 97 paired repetitions per category.

Section 5.3 — Public Verification. The sealed run logs (SEAL.json), per-category results (OMNI_INDEX.json), and four-arm results (SITE_NUMBERS.json) are published on the Company's public GitHub repository at github.com/The-Omni-Compass-LLC/The-Omni-Compass. Any party may independently verify the results by downloading the sealed logs and recomputing the SHA-256 hash.

Section 5.4 — Live Data Feed. This website fetches the current benchmark data directly from the GitHub repository on each page load, with a 5-minute cache. The Receipts tab on the Benchmark Results page displays the live fetch status (green "LIVE" when the GitHub data is current; amber "FALLBACK" when the site is using last-known values because the receipt could not be read from GitHub).

Article VI — Limitations & Scope

Section 6.1 — Test Conditions. All benchmark results represent measured performance under the specific test conditions documented in the sealed run logs. Performance in any specific production deployment will depend on hardware configuration, workload characteristics, network topology, and other factors that may differ from the test conditions.

Section 6.2 — No Deployment Guarantee. The benchmark results are not a guarantee of performance in any specific deployment environment. The Company makes no warranty that any specific deployment will achieve the same results as the benchmark. The benchmark results are evidence of the governing law's capability, not a contractual performance guarantee.

Section 6.3 — Architectural Coverage vs. Benchmark Coverage. The Omni-Compass governing convergence control plane is architecturally designed to govern a broad range of infrastructure domains, including domains not individually benchmarked in V25. The benchmark results cover only the categories listed in Article IV. Claims about architectural coverage of other domains (Azure, Google Cloud, Amazon Cloud, Istio, Terraform, Ceph, ROS 2, etc.) are architectural claims, not benchmark claims, and should be understood as such.

Article VII — Contact & Reproduction Requests

Requests to reproduce, cite, or independently verify the benchmark results should be directed to:

The Omni-Compass LLC
Benchmark & Technical Affairs
benchmark@omni-compass.com
contact@omni-compass.com
Toll-Free: 1-888-DEXYLL-1

© 2026 Dubra Software Inc. / The Omni-Compass LLC · All Rights Reserved · Inventor of Record — AJ Dubra